The Eight channel optocoupler that is used for galvanic separation signals for input to PLC. It's for use anywhere that the creation of ground loops, connection circuits SELV and PELV and other problems associated with the connection of electrically incompatible devices can occur.
The 8xDigimatic serves to automate quality control. It enables the collection of data from measuring instruments in industrial and laboratory environments. Measured values are automatically sent to the server.
The RGB control panel uses coloured backlit buttons to signal the state of machines in industrial environments. Control panels can be equipped with various numbers of buttons. A total of 7 colour combinations are available.
The RGB Link is designed for the connection of RGB control panel to industrial automation. It functions as a voltage converter between TTL and 24 V logic, because the RGB control panel works in TTL logic. Up to two RGB control panels can be connected to the the RGB Link, and each panel can have a maximum of 8 buttons. The RGB Link is equipped with a 35 mm DIN rail system for attachment.
An external chip card reader most often used in combination with an access and attendance system.
A Porosimeter used to measure porosity of a surface. It has an adjustable supply of 3 V - 15 V.
The differential voltage amplifier serves to amplify the differential voltage. It is used to measure a small voltage independent of the supply ground. The required gain can be selected by jumper. The amplifier is designed for an industrial environment.
Repeater/galvanic busbar-separator RS485.
This device is used for measuring the porosity of aluminium cans.